ATXMod2
Ревизия 1.0.1a
The module eats from +12V and produces stresses +5V, -12V and optionally -5V.
Designed for installation in the place of the ATX connector, or on the response part of the connector, to power the amateur personal computer Sprinter.
The module can be used in other similar designs, for example, to power the lakes of Orion-Pro and Radio-86RK, with ATX connectors on the board.
The current via channel +12V is determined by the power source used, it is recommended to use a source with current up to 3.4A (with a capacity of 25..50W). Current through the channel -12V, up to 0.5A, on the channel 5V to 3A.
The output current of -5V is limited to the used regulator and its cooling area, this is about 280mas. When using Sprinter in the computer, you do not need to install a stabilizer D1 if everything you need is already installed on the Sprinter itself.
The source
Ready -made schemes
Herberers
The current version V1.0.1 is tested and works on Sprinter.
