一，介紹
本文記錄JAVA多線程中的中斷機制的一些知識點。主要是stop方法、interrupted()與isInterrupted()方法的區別，並從源代碼的實現上進行簡單分析。
JAVA中有3種方式可以終止正在運行的線程
①線程正常退出，即run()方法執行完畢了
②使用Thread類中的stop()方法強行終止線程。但stop()方法已經過期了，不推薦使用
③使用中斷機制
線程正常退出沒有什麼東東，中斷機制下面詳細介紹，先看下stop()方法的源代碼，關鍵是源代碼上的註釋。它解釋了為什麼stop()不安全，stop()方法停止的是哪個線程？
/*** Forces the thread to stop executing.* <p>* If there is a security manager installed, its <code>checkAccess</code>* method is called with <code>this</code>* as its argument. This may result in a* <code>SecurityException</code> being raised (in the current thread).* <p>* If this thread is different from the current thread (that is, the current* thread is trying to stop a thread other than itself), the* security manager's <code>checkPermission</code> method (with a* <code>RuntimePermission("stopThread")</code> argument) is called in* addition.* Again, this may result in throwing a* <code>SecurityException</code> (in the current thread).* <p>* The thread represented by this thread is forced to stop whatever* it is doing abnormally and to throw a newly created* <code>ThreadDeath</code> object as an exception.* <p>* It is permitted to stop a thread that has not yet been started.* If the thread is eventually started, it immediately terminates.* <p>* An application should not normally try to catch* <code>ThreadDeath</code> unless it must do some extraordinary* cleanup operation (note that the throwing of* <code>ThreadDeath</code> causes <code>finally</code> clauses of* <code>try</code> statements to be executed before the thread* officially dies). If a <code>catch</code> clause catches a* <code>ThreadDeath</code> object, it is important to rethrow the* object so that the thread actually dies.* <p>* The top-level error handler that reacts to otherwise uncaught* exceptions does not print out a message or otherwise notify the* application if the uncaught exception is an instance of* <code>ThreadDeath</code>.** @exception SecurityException if the current thread cannot* modify this thread.* @see #interrupt()* @see #checkAccess()* @see #run()* @see #start()* @see ThreadDeath* @see ThreadGroup#uncaughtException(Thread,Throwable)* @see SecurityManager#checkAccess(Thread)* @see SecurityManager#checkPermission* @deprecated This method is inherently unsafe. Stopping a thread with* Thread.stop causes it to unlock all of the monitors that it* has locked (as a natural consequence of the unchecked* <code>ThreadDeath</code> exception propagating up the stack). If* any of the objects previously protected by these monitors were in* an inconsistent state, the damaged objects become visible to* other threads, potentially resulting in arbitrary behavior. Many* uses of <code>stop</code> should be replaced by code that simply* modifies some variable to indicate that the target thread should* stop running. The target thread should check this variable* regularly, and return from its run method in an orderly fashion* if the variable indicates that it is to stop running. If the* target thread waits for long periods (on a condition variable,* for example), the <code>interrupt</code> method should be used to* interrupt the wait.* For more information, see* <a href="{@docRoot}/../technotes/guides/concurrency/threadPrimitiveDeprecation.html">Why* are Thread.stop, Thread.suspend and Thread.resume Deprecated?</a>.*/@Deprecatedpublic final void stop() {stop(new ThreadDeath());}上面註釋，第9行到第16行表明，stop()方法可以停止“其他線程”。執行thread.stop()方法這條語句的線程稱為當前線程，而“其他線程”則是調用thread.stop()方法的對象thread所代表的線程。
如：
public static void main(String[] args) {MyThread thread = new MyThread...//.....thread.stop();//....}在main方法中，當前線程就是main線程。它執行到第4行，想把“其他線程”thread“ 給停止。這個其他線程就是MyThread類new 的thread對象所表示的線程。
第21行至23行表明，可以停止一個尚未started(啟動)的線程。它的效果是：當該線程啟動後，就立馬結束了。
第48行以後的註釋，則深刻表明了為什麼stop()方法被棄用！為什麼它是不安全的。
比如說，threadA線程擁有了監視器，這些監視器負責保護某些臨界資源，比如說銀行的轉賬的金額。當正在轉賬過程中，main線程調用threadA.stop()方法。結果導致監視器被釋放，其保護的資源（轉賬金額）很可能出現不一致性。比如，A賬戶減少了100，而B賬戶卻沒有增加100
二，中斷機制
JAVA中如何正確地使用中斷機制的細節太多了。 interrupted()方法與isInterrupted()方法都是反映當前線程的是否處於中斷狀態的。
①interrupted()
/*** Tests whether the current thread has been interrupted. The* <i>interrupted status</i> of the thread is cleared by this method. In* other words, if this method were to be called twice in succession, the* second call would return false (unless the current thread were* interrupted again, after the first call had cleared its interrupted* status and before the second call had examined it).** <p>A thread interruption ignored because a thread was not alive* at the time of the interrupt will be reflected by this method* returning false.** @return <code>true</code> if the current thread has been interrupted;* <code>false</code> otherwise.* @see #isInterrupted()* @revised .*/public static boolean interrupted() {return currentThread().isInterrupted(true);}從源碼的註釋中看出，它測試的是當前線程(current thread)的中斷狀態，且這個方法會清除中斷狀態。
②isInterrupted()
/*** Tests whether this thread has been interrupted. The <i>interrupted* status</i> of the thread is unaffected by this method.** <p>A thread interruption ignored because a thread was not alive* at the time of the interrupt will be reflected by this method* returning false.** @return <code>true</code> if this thread has been interrupted;* <code>false</code> otherwise.* @see #interrupted()* @revised .*/public boolean isInterrupted() {return isInterrupted(false);}從源碼註釋中可以看出，isInterrupted()方法不會清除中斷狀態。
③interrupted()方法與isInterrupted()方法的區別
從源代碼可以看出，這兩個方法都是調用的isInterrupted(boolean ClearInterrupted),只不過一個帶的參數是true，另一個帶的參數是false。
/*** Tests if some Thread has been interrupted. The interrupted state* is reset or not based on the value of ClearInterrupted that is* passed.*/private native boolean isInterrupted(boolean ClearInterrupted);
因此，第一個區別就是，一個會清除中斷標識位，另一個不會清除中斷標識位。
再分析源碼，就可以看出第二個區別在return 語句上：
public static boolean interrupted() {return currentThread().isInterrupted(true);}/************************/public boolean isInterrupted() {return isInterrupted(false);}interrupted()測試的是當前的線程的中斷狀態。而isInterrupted()測試的是調用該方法的對象所表示的線程。一個是靜態方法（它測試的是當前線程的中斷狀態），一個是實例方法（它測試的是實例對象所表示的線程的中斷狀態）。
下面用個具體的例子來更進一步地闡明這個區別。
有一個自定義的線程類如下：
public class MyThread extends Thread {@Overridepublic void run() {super.run();for (int i = ; i < ; i++) {System.out.println("i=" + (i + ));}}}先看interrupted()方法的示例：
public class Run {public static void main(String[] args) {try {MyThread thread = new MyThread();thread.start();Thread.sleep();thread.interrupt();//Thread.currentThread().interrupt();System.out.println("是否停止？="+thread.interrupted());//falseSystem.out.println("是否停止？="+thread.interrupted());//false main線程沒有被中斷!!! //......第5行啟動thread線程，第6行使main線程睡眠1秒鐘從而使得thread線程有機會獲得CPU執行。
main線程睡眠1s鐘後，恢復執行到第7行，請求中斷thread線程。
第9行測試線程是否處於中斷狀態，這裡測試的是哪個線程呢？ ？ ？答案是main線程。因為：
（1）interrupted()測試的是當前的線程的中斷狀態
（2）main線程執行了第9行語句，故main線程是當前線程
再看isInterrupted()方法的示例：
public class Run {public static void main(String[] args) {try {MyThread thread = new MyThread();thread.start();Thread.sleep();thread.interrupt();System.out.println("是否停止？="+thread.isInterrupted());//true在第8行，是thread對象調用的isInterrupted()方法。因此，測試的是thread對象所代表的線程的中斷狀態。由於在第7行，main線程請求中斷thread線程，故在第8行的結果為: true