本文實例總結了Java編寫計算器的常見方法。分享給大家供大家參考，具體如下：
方法一：
package wanwa;import java.awt.*;import java.awt.event.*;import javax.swing.*;public class Calculator extends JFrame {private Container container;private GridBagLayout layout;private GridBagConstraints constraints;private JTextField displayField;// 計算結果顯示區private String lastCommand;// 保存+,-,*,/,=命令private double result;// 保存計算結果private boolean start;// 判斷是否為數字的開始public Calculator() {super("Calculator");container = getContentPane();layout = new GridBagLayout();container.setLayout(layout);constraints = new GridBagConstraints();start = true;result = 0;lastCommand = "=";displayField = new JTextField(20);displayField.setHorizontalAlignment(JTextField.RIGHT);constraints.gridx = 0;constraints.gridy = 0;constraints.gridwidth = 4;constraints.gridheight = 1;constraints.fill = GridBagConstraints.BOTH;constraints.weightx = 100;constraints.weighty = 100;layout.setConstraints(displayField, constraints);container.add(displayField);ActionListener insert = new InsertAction();ActionListener command = new CommandAction();// addButton("Backspace", 0, 1, 2, 1, insert);// addButton("CE", 2, 1, 1, 1, insert);// addButton("C", 3, 1, 1, 1, insert);addButton("7", 0, 2, 1, 1, insert);addButton("8", 1, 2, 1, 1, insert);addButton("9", 2, 2, 1, 1, insert);addButton("/", 3, 2, 1, 1, command);addButton("4", 0, 3, 1, 1, insert);addButton("5", 1, 3, 1, 1, insert);addButton("6", 2, 3, 1, 1, insert);addButton("*", 3, 3, 1, 1, command);addButton("1", 0, 4, 1, 1, insert);addButton("2", 1, 4, 1, 1, insert);addButton("3", 2, 4, 1, 1, insert);addButton("-", 3, 4, 1, 1, command);addButton("0", 0, 5, 1, 1, insert);// addButton("+/-", 1, 5, 1, 1, insert);// 只顯示"-"號,"+"沒有實用價值addButton(".", 2, 5, 1, 1, insert);addButton("+", 3, 5, 1, 1, command);addButton("=", 0, 6, 4, 1, command);this.setResizable(false);setSize(180, 200);setVisible(true);}private void addButton(String label, int row, int column, int with,int height, ActionListener listener) {JButton button = new JButton(label);constraints.gridx = row;constraints.gridy = column;constraints.gridwidth = with;constraints.gridheight = height;constraints.fill = GridBagConstraints.BOTH;button.addActionListener(listener);layout.setConstraints(button, constraints);container.add(button);}private class InsertAction implements ActionListener {public void actionPerformed(ActionEvent event) {String input = event.getActionCommand();if (start) {displayField.setText("");start = false;if (input.equals("+/-"))displayField.setText(displayField.getText() + "-");}if (!input.equals("+/-")) { if (input.equals("Backspace")) { String str = displayField.getText();if (str.length() > 0) displayField.setText(str.substring(0, str.length() - 1));} else if (input.equals("CE") || input.equals("C")) {displayField.setText("0");start = true;} elsedisplayField.setText(displayField.getText() + input);}}}private class CommandAction implements ActionListener { public void actionPerformed(ActionEvent evt) { String command = evt.getActionCommand(); if (start) { lastCommand = command; } else { calculate(Double.parseDouble(displayField.getText())); lastCommand = command; start = true; }}}public void calculate(double x) {if (lastCommand.equals("+"))result += x;else if (lastCommand.equals("-"))result -= x;else if (lastCommand.equals("*"))result *= x;else if (lastCommand.equals("/"))result /= x;else if (lastCommand.equals("="))result = x;displayField.setText("" + result);}public static void main(String[] args) {Calculator calculator = new Calculator();calculator.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);}}方法二：
import java.awt.*;import java.awt.event.*;public class MyCalculator { PRivate Frame f; private TextField tf = new TextField(30); private long result; private boolean append=false; private char Operator='='; private Button[] btn=new Button[15]; public MyCalculator() { initComponent(); } private void initComponent() { f = new Frame("My Calculator V1.0"); f.setLayout(new BorderLayout()); //The frame uses BorderLayout f.addWindowListener(new WindowAdapter() { public void windowClosing(WindowEvent evt) { System.exit(0); } }); Panel centerPanel = new Panel(); centerPanel.setLayout(new GridLayout(5, 3)); //The panel uses GridLayout NumberListener nl=new NumberListener(); OperatorListener ol=new OperatorListener(); btn[10]=new Button("+"); btn[11]=new Button("-"); btn[12]=new Button("*"); btn[13]=new Button("/"); btn[14]=new Button("="); for (int i=0;i<=9;i++){ btn[i]=new Button(String.valueOf(i)); centerPanel.add(btn[i]); btn[i].addActionListener(nl); if (i%2==1){ centerPanel.add(btn[(i+19)/2]); btn[(i+19)/2].addActionListener(ol); } } f.add(centerPanel, BorderLayout.CENTER); Panel northPanel = new Panel(); tf.setEditable(false); northPanel.add(tf); f.add(northPanel, BorderLayout.NORTH); } public void go() { f.pack(); f.setVisible(true); } public static void main(String[] args) { new MyCalculator().go(); } /** *採用成員內部類方式，實現監聽器接口，方便訪問主類內類內部成員。 *此類負責數字按鈕Action事件監聽和處理*/ class NumberListener implements ActionListener{ public void actionPerformed(ActionEvent e){ if (!append) { tf.setText(""); append=true; } String s=tf.getText(); s+=e.getActionCommand(); tf.setText(s); if (!btn[10].isEnabled()){ for(int i=10;i<=14;i++) btn[i].setEnabled(true); } } } /** * 成員內部類，負責操作符按鈕的事件處理*/ class OperatorListener implements ActionListener{ public void actionPerformed(ActionEvent e){ if (!append) return; for(int i=10;i<=14;i++) btn[i].setEnabled(false); String s=tf.getText(); long num=Long.parseLong(s);//get the number of textfield append=false; //set append switch(operator){ case '+':result+=num;break; case '-':result-=num;break; case '*':result*=num;break; case '/':{ if (num==0) result=0; else result/=num; break; } case '=':result=num;break; } tf.setText(String.valueOf(result)); //set the value of result to textfield String op=e.getActionCommand(); operator=op.charAt(0); // set operator } }}方法三：
package wanwa;import java.util.*;public class calc {public static void main(String[] args) {Scanner input = new Scanner(System.in);System.out.println("*****************簡易計算器****************");System.out.println("*/t/t/t/t/t*");System.out.println("* 使用說明： 1.加法2.減法3.乘法4.除法*");System.out.println("*/t/t/t/t/t*");System.out.println("*****************************************");for(int i=0;i<100;i++){System.out.print("/n請選擇運算規則：");int num = input.nextInt();switch(num){case 1:System.out.println("/n******你選擇了加法******/n");System.out.print("請輸入第1個加數:");int jiashu1 = input.nextInt();System.out.print("請輸入第2個加數:");int jiashu2 = input.nextInt();System.out.println("運算結果為:" + jiashu1 + " + " + jiashu1 + " = " + (jiashu1 + jiashu2));break;case 2:System.out.println("/n******你選擇了減法******/n");System.out.print("請輸入被減數:");int jianshu1 = input.nextInt();System.out.print("請輸入減數:");int jianshu2 = input.nextInt();System.out.println("運算結果為:" + jianshu1 + " - " + jianshu2 + " = " + (jianshu1 - jianshu2));break;case 3:System.out.println("/n******你選擇了乘法******/n");System.out.print("請輸入第1個因數:");int chengfa1 = input.nextInt();System.out.print("請輸入第2個因數:");int chengfa2 = input.nextInt();System.out.println("運算結果為:" + chengfa1 + " * " + chengfa2 + " = " + (chengfa1 * chengfa2));break;case 4:System.out.println("/n******你選擇了除法******/n");System.out.print("請輸入被除數:");double chufa1 = input.nextInt();System.out.print("請輸入除數:");double chufa2 = input.nextInt();System.out.println("運算結果為:" + chufa1 + " / " + chufa2 + " = " + (chufa1 / chufa2) + " 餘" + (chufa1 % chufa2));break;default:System.out.println("/n你的選擇有錯，請重新選擇!");break;}}}}方法四：
package wanwa;import java.awt.*;import java.awt.event.*;import javax.swing.*;public class Calculator extends JFrame {private Container container;private GridBagLayout layout;private GridBagConstraints constraints;private JTextField displayField;// 計算結果顯示區private String lastCommand;// 保存+,-,*,/,=命令private double result;// 保存計算結果private boolean start;// 判斷是否為數字的開始public Calculator() {super("Calculator");container = getContentPane();layout = new GridBagLayout();container.setLayout(layout);constraints = new GridBagConstraints();start = true;result = 0;lastCommand = "=";displayField = new JTextField(20);displayField.setHorizontalAlignment(JTextField.RIGHT);constraints.gridx = 0;constraints.gridy = 0;constraints.gridwidth = 4;constraints.gridheight = 1;constraints.fill = GridBagConstraints.BOTH;constraints.weightx = 100;constraints.weighty = 100;layout.setConstraints(displayField, constraints);container.add(displayField);ActionListener insert = new InsertAction();ActionListener command = new CommandAction();// addButton("Backspace", 0, 1, 2, 1, insert);// addButton("CE", 2, 1, 1, 1, insert);// addButton("C", 3, 1, 1, 1, insert);addButton("7", 0, 2, 1, 1, insert);addButton("8", 1, 2, 1, 1, insert);addButton("9", 2, 2, 1, 1, insert);addButton("/", 3, 2, 1, 1, command);addButton("4", 0, 3, 1, 1, insert);addButton("5", 1, 3, 1, 1, insert);addButton("6", 2, 3, 1, 1, insert);addButton("*", 3, 3, 1, 1, command);addButton("1", 0, 4, 1, 1, insert);addButton("2", 1, 4, 1, 1, insert);addButton("3", 2, 4, 1, 1, insert);addButton("-", 3, 4, 1, 1, command);addButton("0", 0, 5, 1, 1, insert);// addButton("+/-", 1, 5, 1, 1, insert);// 只顯示"-"號,"+"沒有實用價值addButton(".", 2, 5, 1, 1, insert);addButton("+", 3, 5, 1, 1, command);addButton("=", 0, 6, 4, 1, command);this.setResizable(false);setSize(180, 200);setVisible(true);}private void addButton(String label, int row, int column, int with,int height, ActionListener listener) {JButton button = new JButton(label);constraints.gridx = row;constraints.gridy = column;constraints.gridwidth = with;constraints.gridheight = height;constraints.fill = GridBagConstraints.BOTH;button.addActionListener(listener);layout.setConstraints(button, constraints);container.add(button);}private class InsertAction implements ActionListener {public void actionPerformed(ActionEvent event) {String input = event.getActionCommand();if (start) {displayField.setText("");start = false;if (input.equals("+/-"))displayField.setText(displayField.getText() + "-");}if (!input.equals("+/-")) { if (input.equals("Backspace")) { String str = displayField.getText();if (str.length() > 0) displayField.setText(str.substring(0, str.length() - 1));} else if (input.equals("CE") || input.equals("C")) {displayField.setText("0");start = true;} elsedisplayField.setText(displayField.getText() + input);}}}private class CommandAction implements ActionListener { public void actionPerformed(ActionEvent evt) { String command = evt.getActionCommand(); if (start) { lastCommand = command; } else { calculate(Double.parseDouble(displayField.getText())); lastCommand = command; start = true; }}}public void calculate(double x) {if (lastCommand.equals("+"))result += x;else if (lastCommand.equals("-"))result -= x;else if (lastCommand.equals("*"))result *= x;else if (lastCommand.equals("/"))result /= x;else if (lastCommand.equals("="))result = x;displayField.setText("" + result);}public static void main(String[] args) {Calculator calculator = new Calculator();calculator.setDefaultCloSEOperation(JFrame.EXIT_ON_CLOSE);}}希望本文所述對大家Java程序設計有所幫助。