Discuz!NT 论坛整合ASP程序论坛 实现代码。复制代码代码如下:
登陆时记录cookies页面代码
<!--#include file=md5.asp--> //32位md5加密文件,一定得调用,该文件到处有,我就不提供了
<%
dim Username,Password,Question,Answer,Expires,Verify
Username=replace(trim(Request.form(Username)),','') //用户名
Password=replace(trim(Request.form(Password)),','') //用户密码
Question=replace(trim(Request.form(Question)),','') //密码问题
Answer=replace(trim(Request.form(Answer)),','') //密码答案
Expires=replace(trim(Request.form(Expires)),','') //cookies记录时长
Verify=replace(trim(Request.form(Verify)),','') //验证码
//此处加上提交的验证,如xxx不能为空等或字段长度等
sql=select * from [dnt_users] where username='&Username' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=conn.execute(sql)
if rs.eof then
Response.Write (<script>alert('提示!/n/n用户帐号错误!');history.back();</script>)
Response.end
else
if rs(password)<>md5(Password) then
Response.Write (<script>alert('提示!/n/n用户密码错误!');history.back();</script>)
Response.end
else
if rs(secques)<>Answer then
Response.Write (<script>alert('提示!/n/n安全答案错误!');history.back();</script>)
Response.end
else
Dim DES,DESCode
Set DES=Server.CreateObject(DiscuzNT.DES)
DESCode=DES.Encode(&rs(password),Z143D2VBML) //Z143D2VBML为你的DES加密密钥,请用记事本打开CONFIG目录里的general.config文件,找到<Passwordkey>Z846D4VVZL</Passwordkey>这行,<Passwordkey>与</Passwordkey>中间的英文就是你的密钥,把密钥修改成你的文件的
Set DES=Nothing
Response.Cookies(dnt)(userid) = rs(uid)
Response.Cookies(dnt)(password) = DESCode
Response.Cookies(dnt)(tpp) = rs(tpp)
Response.Cookies(dnt)(ppp) = rs(ppp)
Response.Cookies(dnt)(pmsound) = rs(pmsound)
Response.Cookies(dnt)(invisible) = rs(invisible)
Response.Cookies(dnt)(referer) = index.aspx
Response.Cookies(dnt)(sigstatus) = rs(sigstatus)
Response.Cookies(dnt)(expires) = Expires
if Expires<>0 then
Response.Cookies(dnt).Expires = DateAdd(N, Expires, Now())
end if
Response.Cookies(dnt).Domain = .xxx.com //修改为你的域名,注意前面带.(点)
Response.Cookies(dnt).Secure = False
end if
end if
end if
rs.close
set rs=nothing
//此处加登陆后转向或向其他操作,具体你自己看着办
%>
===========================================================================================
注册页面代码(注册完后同时登陆状态)
<!--#include file=md5.asp--> //32为md5加密文件,一定得调用,该文件到处有,我就不提供了
<%
dim Username,Password,CheckPassword,Email,Question,Answer,Verify
Username=replace(trim(Request.form(Username)),','') //用户名
Password=replace(trim(Request.form(Password)),','') //用户密码
CheckPassword=replace(trim(Request.form(CheckPassword)),','') //密码验证
Question=replace(trim(Request.form(Question)),','') //密码问题
Answer=replace(trim(Request.form(Answer)),','') //密码答案
Expires=replace(trim(Request.form(Expires)),','') //cookies记录时长
Verify=replace(trim(Request.form(Verify)),','') //验证码
//此处加上提交的验证,如xxx不能为空等或字段长度等
sql=select * from [dnt_users] where username='&Username' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=conn.execute(sql)
if not rs.eof then
Response.Write (<script>alert('提示!/n/n用户帐号已被注册使用!');history.back();</script>)
Response.end
end if
rs.close
set rs=nothing
sql=select * from [dnt_users] where Email='&Email' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=conn.execute(sql)
if not rs.eof then
Response.Write (<script>alert('提示!/n/n电子邮箱已被注册使用!');history.back();</script>)
Response.end
end if
rs.close
set rs=nothing
ip = request.servervariables(http_x_forwarded_for)
if ip = then ip = request.servervariables(remote_addr)
sql=insert into [dnt_users] (username,nickname,password,secques,gender,adminid,groupid,groupexpiry,extgroupids,regip,joindate,lastip,lastvisit,lastactivity,lastpost,lastpostid,lastposttitle,posts,digestposts,oltime,pageviews,credits,extcredits1,extcredits2,extcredits3,extcredits4,extcredits5,extcredits6,extcredits7,extcredits8,avatarshowid,email,bday,sigstatus,tpp,ppp,templateid,pmsound,showemail,newsletter,invisible,newpm,newpmcount,accessmasks,onlinestate) values ('&Username',' ','&MD5(Password)','&Answer',0,0,10,0,' ','&ip','&now()','&ip','&now()','&now()','&now()',0,' ',0,0,0,0,0,'0.00','0.00','0.00','0.00','0.00','0.00','0.00','0.00',0,'&Email',' ',1,0,0,0,1,1,1,0,1,1,0,1)
set rs=conn.execute(sql)
sql=select uid from [dnt_users] where username='&Username' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=conn.execute(sql)
Uid=rs(0)
sql=insert into [dnt_userfields] (uid,avatar,avatarwidth,avatarheight,authtime,authflag) values ('&Uid','avatars/common/0.gif',0,0,'&now()',0)
set rs=conn.execute(sql)
sql=update [dnt_statistics] set totalusers=totalusers+1,lastusername='&Username',lastuserid='&Uid'
set rs=conn.execute(sql)
sql=select * from [dnt_users] where username='&Username' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=conn.execute(sql)
if rs.eof then
Response.Write (<script>alert('提示!/n/n用户帐号错误!');history.back();</script>)
Response.end
else
if rs(password)<>md5(Password) then
Response.Write (<script>alert('提示!/n/n用户密码错误!');history.back();</script>)
Response.end
else
Dim DES,DESCode
Set DES=Server.CreateObject(DiscuzNT.DES)
DESCode=DES.Encode(&rs(password),Z143D2VBML) //Z143D2VBML为你的DES加密密钥,请用记事本打开CONFIG目录里的general.config文件,找到<Passwordkey>Z846D4VVZL</Passwordkey>这行,<Passwordkey>与</Passwordkey>中间的英文就是你的密钥,把密钥修改成你的文件的
Set DES=Nothing
Response.Cookies(dnt)(userid) = rs(uid)
Response.Cookies(dnt)(password) = DESCode
Response.Cookies(dnt)(tpp) = rs(tpp)
Response.Cookies(dnt)(ppp) = rs(ppp)
Response.Cookies(dnt)(pmsound) = rs(pmsound)
Response.Cookies(dnt)(invisible) = rs(invisible)
Response.Cookies(dnt)(referer) = index.aspx
Response.Cookies(dnt)(sigstatus) = rs(sigstatus)
Response.Cookies(dnt)(expires) = 0
Response.Cookies(dnt).Domain = .xxx.com //修改为你的域名,注意前面带.(点)
Response.Cookies(dnt).Secure = False
end if
end if
rs.close
set rs=nothing
//此处加注册后转向或向另外一个用户表添加同步用户数据,具体你自己看着办
%>
===========================================================================================
编辑页面代码(编辑密码后无需重新登陆)
<!--#include file=md5.asp--> //32为md5加密文件,一定得调用,该文件到处有,我就不提供了
<%
dim Username,Password,CheckPassword,Email,Question,Answer,Verify
Username=replace(trim(Request.form(Username)),','') //用户名
Password=replace(trim(Request.form(Password)),','') //用户密码
CheckPassword=replace(trim(Request.form(CheckPassword)),','') //密码验证
Question=replace(trim(Request.form(Question)),','') //密码问题
Answer=replace(trim(Request.form(Answer)),','') //密码答案
Expires=replace(trim(Request.form(Expires)),','') //cookies记录时长
Verify=replace(trim(Request.form(Verify)),','') //验证码
//此处加上提交的验证,如xxx不能为空等或字段长度等
if Password<> then
if Password<>CheckPassword then
Response.Write (<script>alert('提示!/n/n验证密码与用户密码不相同!');history.back();</script>)
Response.end
end if
Password=MD5(Password)
else
Password=U_Password //U_Password为你的32位MD5加密密码,在验证时读取出来用来这里验证
end if
if AnswerTrue=true then
if Question<>0 then
Answer=mid(MD5(Answer+MD5(Question)),16,8)
else
Answer=
end if
else
Answer=U_Secques //U_Secques为你的密码答案,在验证时读取出来用来这里验证
end if
ip = request.servervariables(http_x_forwarded_for)
if ip = then ip = request.servervariables(remote_addr)
sql=select * from [dnt_users] where username='&Username' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=Conn.execute(Sql)
If Rs.eof then
Response.Write (<script>alert('提示!/n/n用户帐号错误!');history.back();</script>)
Response.end
else
sql=select * from [dnt_users] where email='&Email' and username<>'&Username' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=conn.execute(sql)
if not rs.eof then
response.write (<script>alert('友情提示!/n/n邮箱已被使用!');history.back();</script>)
response.end
else
sql=update [dnt_users] set password='&Password',secques='&Answer',email='&Email' where username='&Username' //为了方便,此处我就不加过滤函数了,如你使用时一定加上,否则被注入
set rs=conn.execute(sql)
Set DES=Server.CreateObject(DiscuzNT.DES)
DESCode=DES.Encode(&Password,Z143D2VBML) //Z143D2VBML为你的DES加密密钥,请用记事本打开CONFIG目录里的general.config文件,找到<Passwordkey>Z846D4VVZL</Passwordkey>这行,<Passwordkey>与</Passwordkey>中间的英文就是你的密钥,把密钥修改成你的文件的
Set DES=Nothing
Response.Cookies(dnt)(userid) = rs(uid)
Response.Cookies(dnt)(password) = DESCode
Response.Cookies(dnt)(tpp) = rs(tpp)
Response.Cookies(dnt)(ppp) = rs(ppp)
Response.Cookies(dnt)(pmsound) = rs(pmsound)
Response.Cookies(dnt)(invisible) = rs(invisible)
Response.Cookies(dnt)(referer) = index.aspx
Response.Cookies(dnt)(sigstatus) = rs(sigstatus)
Response.Cookies(dnt)(expires) = 0
Response.Cookies(dnt).Domain = .xxxx.com //修改为你的域名,注意前面带.(点)
Response.Cookies(dnt).Secure = False
end if
end if
rs.close
set rs=nothing
//此处加编辑后转向或向另外一个用户表添加同步用户数据,具体你自己看着办
%>
=============================================================================================
退出验证cookies页面代码
<%
Response.Cookies(dnt)(userid) =
Response.Cookies(dnt)(password) =
Response.Cookies(dnt)(tpp) =
Response.Cookies(dnt)(ppp) =
Response.Cookies(dnt)(pmsound) =
Response.Cookies(dnt)(invisible) =
Response.Cookies(dnt)(referer) =
Response.Cookies(dnt)(sigstatus) =
Response.Cookies(dnt)(expires) =
Response.Cookies(dnt).Expires =
Response.Cookies(dnt).Domain = .xxx.com
Response.Cookies(dnt).Secure = False
Response.Write (<script>alert('提示!/n/n用户注销登陆完毕!');self.opener.location.reload();window.close();</script>)
Response.end
%>
==============================================================================================
验证cookies页面代码,这是我为了简单随手写的一段验证代码,基本都是大同小异,具体你根据你的asp程序验证文件来修改
%>
Dim DES,DESCode
Set DES=Server.CreateObject(DiscuzNT.DES)
DESCode=DES.Decode(&request.cookies(dnt)(password),Z143D2VBML) //Z143D2VBML为你的DES加密密钥,请用记事本打开CONFIG目录里的general.config文件,找到<Passwordkey>Z846D4VVZL</Passwordkey>这行,<Passwordkey>与</Passwordkey>中间的英文就是你的密钥,把密钥修改成你的文件的
Set DES=Nothing
//下面是读取数据库来验证你的cookies是否正确
dim U_UId,U_UserName,U_Password,U_Secques,U_Email
Sql=select uid,username,password,secques,email from [dnt_users] where uid='&request.cookies(dnt)(userid)' and password='&DESCode' //为了方便,cookies用户和密码我就不加过滤函数了,如你使用时一定加上,否则被注入,就过滤些单引号及一些比较敏感的就可以了
Set Rs=Conn.execute(Sql)
if not rs.eof then
founduser = true
U_UId = Rs(0)
U_UserName = Rs(1)
U_Password = Rs(2)
U_Secques = Rs(3)
U_Email = Rs(4)
else
founduser = false
end if
rs.close
set rs=nothing
%>