For the tutorial I posted before, friends were very enthusiastic to leave messages in the comments. I saw a lot of comments asking for the tutorial on the fire ladder truck. So in this issue, I will use pictures and texts to teach you how to make a fire ladder truck.

First, we use the recently updated tool "Terrain Editor" to quickly build a 5×20 car base.

Build a car front
Put on the driver's seat and the infinite engine


Counting from the front of the car, there are 7 empty lines
Place two iron blocks here on the eighth row
Put two rotating shafts on the iron block


Start building a ladder with a piece of cotton in the middle of the rotating shaft.
Install the rotating shaft upward near the front of the car.


The ladder turns upward
Just keep riding like this
Turn when you encounter obstacles
After winding it twice
Start building the platform for the ladder
Place a 5 x 5 glass platform in the middle
Wrap cotton all around
Install the fence
Put some more chairs
The platform is set up


Dye the car
put on wheels


Install 4 sequencers on these two pillars at the front of the car

take out the connector
Connect in this order
Connect the sequencer to the driver's seat
Follow my steps to set up the first sequencer


There is also a second sequencer


Connect the third or fourth sequencer
The order of connection is the same as the first two
Then set up the third sequencer and the fourth sequencer


Finally, the glass is installed on the front of the car and it is finished.

Finally, we generate it and start it to see the effect.



This is a very cool fire ladder truck. Friends, have you learned it? If you have any questions, you can tell me in the comments.