shadowsocksr native
Version 0.9.4
Please use overtls, a new proxy, which is equivalent to SSRoT to remove SSR and SS, and only retains the Rust implementation of OT, which is very fast and as stable as an old dog.
Please use overtls, a Rust implementation of SSRoT without SSR and SS, only retaining OT, which is fast and stable.
New Features: GFW Terminator SSRoT
Written to high-risk people who have climbed over the wall
Help developers improve SSRoT
New feature: GFW terminator SSRoT English tutorial
ShadowsocksR-native is a lightweight secured SOCKS5 proxy for embedded devices and low-end boxes. It's derived from Shadowsocks-libev.
It is a port of ShadowsocksR created by @breakwa11, which is maintained by @ssrlive.
Current version: 0.4 | Changelog
ShadowsocksR-native is written in pure C and only depends on libuv , mbedTLS , libsodium and json-c.
In normal usage, the memory footprint is about 600KB and the CPU utilization is no more than 5% on a low-end router (Buffalo WHR-G300N V2 with a 400MHz MIPS CPU, 32MB memory and 4MB flash).
For a full list of feature comparison between different versions of shadowsocks, refer to the Wiki page.
| none | table | ||||
| rc4 | rc4-md5-6 | rc4-md5 | |||
| aes-128-cfb | aes-192-cfb | aes-256-cfb | |||
| aes-128-ctr | aes-192-ctr | aes-256-ctr | |||
| camellia-128-cfb | camellia-192-cfb | camellia-256-cfb | |||
| bf-cfb | cast5-cfb | des-cfb | idea-cfb | rc2-cfb | seed-cfb |
| salsa20 | chacha20 | chacha20-ietf | |||
| aes-128-gcm | aes-192-gcm | aes-256-gcm | chacha20-ietf-poly1305 | xchacha20-ietf-poly1305 |
| Protocols | obfuscators |
|---|---|
| origin | plain |
| auth_sha1_v4 | http_simple |
| auth_aes128_sha1 | http_post |
| auth_aes128_md5 | http_mix |
| auth_chain_a | tls1.2_ticket_auth |
| auth_chain_b | tls1.2_ticket_fastauth |
| auth_chain_c/d/e/f |
progress of data flow
+-----------------------------------------------------------------------------+
| +--------------------------------------------------------+ |
| | +------------------------------------+ | |
| | | +-------------------+ | | |
| obfuscator | encryptor | protocol | user data | | | |
| | | | | | +-------------------+ | | |
| | | | +------+-----------------------------+ | |
| | +-------+--------------+---------------------------------+ |
+---+--------------------+--------------+-------------------------------------+
| | |
+-- server_encode +-- encrypt +-- server_pre_encrypt <<<=== user data
| | |
+-- server_decode +-- decrypt +-- server_post_decrypt ===>>> user data
For Unix-like systems, especially Debian-based systems, eg Ubuntu, Debian or Linux Mint, you can build the binary like this:
# Debian / Ubuntu
# sudo su # using root account
sudo apt-get update -y
sudo apt-get upgrade -y
sudo apt-get install --no-install-recommends build-essential autoconf libtool asciidoc xmlto -y
sudo apt-get install git gcc g++ gdb cmake automake -y
sudo apt-get -f install -y
# cd / # switch to root directory
git clone --recursive https://github.com/ShadowsocksR-Live/shadowsocksr-native.git ssr-n
cd ssr-n # enter ssr-n directory.
# build ShadowsocksR-native
mkdir build && cd build
cmake .. && make
# make install
# /bin/cp -rfa src/ssr-* /usr/bin
# build 32-bit binary
sudo apt-get install gcc-multilib -y
rm -rf *
cmake -D CMAKE_C_FLAGS=-m32 .. && make
The target binaries are ssr-n/build/src/ssr-server , ssr-n/build/src/ssr-client .
CentOS 7 only. we don't support CentOS 6.x, it's too old.
Before build ssr-Native , we must install cmake 3.x first. following this
# CentOS / Fedora / RHEL
sudo su
yum install wget git gcc gcc-c++ gdb autoconf automake libtool make asciidoc xmlto -y
curl https://cmake.org/files/v3.25/cmake-3.25.1-linux-x86_64.sh -o a.sh
sh a.sh --prefix=/usr/ --exclude-subdir && rm -rf a.sh
cd /
git clone --recursive https://github.com/ShadowsocksR-Live/shadowsocksr-native.git ssr-n
cd ssr-n
# Since there no stdatomic.h exist in CentOS 7, we have to use older libuv version.
# Fedora / RHEL can skip the steps.
cd depends/libuv
git checkout 71932a9fc9e234b3ebac90de0dd061fb00ba191b
cd ../..
mkdir build && cd build
cmake .. && make
# make install
# /bin/cp -rfa src/ssr-* /usr/bin The target binaries are ssr-n/build/src/ssr-server , ssr-n/build/src/ssr-client .
For macOS, we must download/install/run Xcode first.
Then use Homebrew to install or build.
Install Homebrew and tools:
ruby -e " $( curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install ) "
brew install git cmake automake libtool
brew upgrade git cmake automake libtoolNow get source code and build it.
git clone --recursive https://github.com/ShadowsocksR-Live/shadowsocksr-native.git ssr-n
cd ssr-n
mkdir build && cd build
cmake .. && make The target binaries are ssr-n/build/src/ssr-server , ssr-n/build/src/ssr-client .
For Windows, chekout the project using the following commands then open win32/ssr-native.sln with Visual Studio 2010. Enjoy it!
git clone --recursive https://github.com/ShadowsocksR-Live/shadowsocksr-native.git ssr-nFor a detailed and complete list of all supported arguments, you may refer to the man pages of the applications, respectively.
ssr-[client|local|server]
[-c <config_file>] The path to config file
[-d] Run in background as a daemon.
[-h] Show this help message.
config.json
{
"password" : " password " ,
"method" : " aes-128-ctr " ,
"protocol" : " auth_aes128_md5 " ,
"protocol_param" : " " ,
"obfs" : " tls1.2_ticket_auth " ,
"obfs_param" : " " ,
"udp" : true ,
"idle_timeout" : 300 ,
"connect_timeout" : 6 ,
"udp_timeout" : 6 ,
"server_settings" : {
"listen_address" : " 0.0.0.0 " ,
"listen_port" : 12475
},
"client_settings" : {
"server" : " 12.34.56.78 " ,
"server_port" : 12475 ,
"listen_address" : " 0.0.0.0 " ,
"listen_port" : 1080
},
"over_tls_settings" : {
"enable" : false ,
"server_domain" : " goodsitesample.com " ,
"path" : " /udg151df/ " ,
"root_cert_file" : " "
}
}In the CentOS 7, the cmake version is too old to work with ShadowsocksR-Native. So we must install it by ourselves.
sudo su
cd /
wget --no-check-certificate https://cmake.org/files/v3.25/cmake-3.25.1-linux-x86_64.sh -O a.sh
bash a.sh --prefix=/usr/ --exclude-subdir
rm -rf a.sh
cmake --version And the cmake --version command will output message likes:
cmake version 3.25.0
CMake suite maintained and supported by Kitware (kitware.com/cmake).
Supporting CentOS 7 / Debian / Ubuntu with the following commands
sudo su
wget --no-check-certificate https://raw.githubusercontent.com/ShadowsocksR-Live/shadowsocksr-native/master/install/ssrn-install.sh
chmod +x ssrn-install.sh
./ssrn-install.sh 2>&1 | tee ssr-n.log
After installation, we can view the status with
systemctl status ssr-native.service
And we can view or edit the configuration with cat or vi in root privilege
cat /etc/ssr-native/config.json
After we changed the server configuration, we must restart the service to make the changes take effect.
systemctl restart ssr-native.service
To stop the server, please run
systemctl stop ssr-native.service
To uninstall the server, use the following command
./ssrn-install.sh uninstall
