tuya convert os

---

What is Tuya Convert OS?

Tuya Convert OS is a customized Raspbian OS image that runs Tuya Convert with a friendly user interface.

This tool will help you flash custom firmware on ESP8266/ESP8285-based devices that run Tuya firmware.

Check out these screenshots if you want to see it in action.

Requirements

• a Raspberry Pi 3 or 4 board (any model)
• a micro SD card (any size above 2GB will do)
• a wired network connection

Optionally, the presence of a secondary Wi-Fi USB adapter will fix some cases where a 3rd Wi-Fi device has to be connected to the temporary access point.

Getting Started

1. Download Tuya Convert OS from the releases page.

2. Extract the compressed image.

3. Follow these instructions to write the OS image on your SD card.

4. Connect the Raspberry Pi to your local network, using an ethernet cable.

5. Boot your Raspberry Pi with the freshly written SD card. Find its IP address using one of the following methods (the hostname you should be looking for is tuya-convert):

   • smart phone apps like Fing to scan your network
   • looking through your router's DHCP leases
   • an attached display will show the IP address
   • accessing tuya-convert.local may work on your local network

6. Point your favorite browser to http://ipaddress (http://tuya-convert.local may also work). You should see a web page that will walk you through the entire conversion process.

Troubleshooting

You can login remotely using SSH/Putty and use default Raspbian credentials (username pi, password raspberry).

The frontend is provided by a service called tcfrontend. It is also responsible for spawning tuya-convert scripts in the background. You can read its log using journactl:

journalctl -u tcfrontend -f

Rebuilding Image

If you want to rebuild the OS image from scratch, you'll need to:

• run Linux on your laptop
• have the following commands available: git, curl, rsync, zip, unzip, losetup, fdisk, qemu-system-arm

Then simply run:

git clone https://github.com/qtoggle/tuya-convert-os.git
cd tuya-convert-os
sudo ./build.sh

At the end of a successful build, you should have a tuya-convert-os.img and a compressed tuya-convert-os.zip.