PFT Linux Download - PFT Linux Source code download

PFT Linux

FLASH source code

1.0.0

Download

PFT Linux | Latest release

Screenshot of PFT port by Zalexanninev15 (left) and jno (right)

Main authors of PFT

friendki11er - author of the original PFT tool for Windows, file to get half-root rights (post with PFT)
jno - ported PFT for Linux (original port of PTF on Linux)
Zalexanninev15 - minor edits for PTF port for Linux, exclusive installer, new PFT port for Linux and PFT Linux Project

Description

Installer (for tools) & tools for flash & dump partitions for ZTE Blade V9 Vita and ZTE Blade A7 Vita for Linux. Tools used ADB and emmcdl.

System requirements

Linux: Mint/Ubuntu/Debian, Manjaro
Additional: Internet (only for installer)

Instruction for use

Download and run this script for the correct install "adb", "emmcdl" and PFT Linux
Run the script "pft.sh" ("./pft.sh") (port by jno) or "npft" (port by Zalexaninnev15)

Instructions for PFT Linux by Zalexanninev15. For PFT port by jno see here

Write "8", write your password and re-login in to your account
Write "7" and write your password
Set your smartphone into EDL mode:

ADB: Write "2" and wait
DFU: point 4, write "1", point 4 (the port may change, so it may be necessary to change it (enter "H" when they ask about the port, then follow the instructions and the port will be checked))

Check the appearance of the diagnostic port "/dev/ttyUSB0". Write "9" and "S"
Flash and Backup (but it has not yet been implemented, so use the port by jno)

All Errors of emmcdl (source)

Status: 21 The device is not ready

Most likely your smartphone has left EDL mode, enter this mode again.

WARNING: Flash programmer failed to load trying to continue

Maybe this is a crash in emmcdl. If the flash/dump is on, then you should not worry, but if not, then it is worth putting your smartphone back into EDL mode.